PuzzleProz.com

PuzzlePro · Last edited by PuzzlePro on Thu Nov 06, 2008 10:14 am; edited 3 times in total

There was a discussion regarding selling individual DIY pieces.

I decided that I would sell individual pieces to forum members at the following prices:

$0.50 each - Edge Pieces and Corner Pieces (comes with Corner Cap)
$2.00 each - Center Pieces (comes with Center Cap)
$2.00 each - Complete Screw/Spring/Washer sets
$2.00 each - Core (Yellow Type A)

These prices are good for Black, White & Yellow Type-A kits

Shipping is additional.

Except for the Screw Sets, I can ship for free when purchased with another cube.

Screws sets are a bit heavier - Typically they will add about $0.17 to the shipping costs, but may force an order over the 13oz weight which then means Priority Shipping.

If you're already shipping via Priority - either because the weight of the order demands it or because you upgrade your order for faster delivery - then I will not charge any extra shipping costs.

These prices are good until further notice.

PuzzlePro · Posted: Sat Feb 09, 2008 10:22 pm Post subject:

Update:

I have had several people buying up Center Pieces + Caps, leaving me with a bunch of Edge and Corner pieces.

So I am going to have stop selling Center Pieces for the time being.

I will post an update if the status changes.

*UPDATE* Center pieces are available for purchase once again.

Cham Clowder · Joined: 20 May 2008 Posts: 193 Location: Canadia Land

Someone dropped my 3x3 on the gound >_> So I might be buying another corner piece sometime. Probably when I get my stickers too.

You have white pieces?

EDIT: Just read the rest of your post. Nevermind xP

kylerv333 · Joined: 03 Dec 2007 Posts: 13

Is it still possible to order sets of screws, washers, and springs? If so, how would I go about doing so?

PuzzlePro · Posted: Sun Jun 22, 2008 9:43 pm Post subject: Re: Screw+ Washer sets

kylerv333 · Joined: 03 Dec 2007 Posts: 13

Great Thanks I should be placing an order in the next couple of weeks.

PuzzlePro · Posted: Fri Aug 22, 2008 12:45 pm Post subject:

Just a quick bump to say that I have modified the prices.

Corner pieces now come with the corner cap at no extra charge.

Center pieces have had their price increased to $2.00 each now includes the center cap at no extra charge.

It turns out that all anybody wants is center pieces, so I need to adjust the pricing so that I'm not just sitting on a bunch of edge and corner pieces keeping me from selling cubes at full price.

If you need more than a couple of center pieces, you are better off buying a whole cube and keeping the spare pieces for yourself.

chikenlordsan94 · Joined: 28 Oct 2008 Posts: 1

Is it possible to get a screw/spring/washer set that will work with type D cubes?

Cham Clowder · Joined: 20 May 2008 Posts: 193 Location: Canadia Land

http://www.puzzleproz.com/forums/viewtopic.php?t=627

You're going to have to read that whole tl;dr post about the screws.

jmlee337 · Joined: 28 Aug 2008 Posts: 17

does the screw sets for sale offer extend to 'good' type D screws?

PuzzlePro · Posted: Tue Dec 09, 2008 11:31 am Post subject:

huntdonger · Joined: 17 Sep 2008 Posts: 4

I was wondering if these screw sets are compatible with all type A sets. I say this meaning the type II and type III a kits.

PuzzlePro · Posted: Thu Dec 18, 2008 10:15 am Post subject:

Herm · Joined: 06 Feb 2009 Posts: 12

Could I use the the type A core with a Glowie C cube kit? Would I need to get different screws?

lalalala · Joined: 25 Sep 2008 Posts: 98

yes you can and i recommend you buy the spring screw set too because if you use both the core and the spring screw set your type c it will fell great.
for my glow in the dark cube i used the old type a core(which he sells) and id use the spring screw set(he sells that too) but i dont use the springs form his set i use the original type c springs and for sum reason that made my cube fell even better

Vulosity · Joined: 05 May 2008 Posts: 71

Can you measure and post the length of the screw? I have screws form 9spuzzles that were supposedly type a, but they were too long.

KTOmega · Joined: 04 Apr 2009 Posts: 3

Hey guys, is it possible to order these with a DIY kit on eBay?

Just wondering cause I want to combine some shipping. Planning on buying a type A core.

unknown.soul · Joined: 30 May 2008 Posts: 64

Making an order here on the forums isn't hard.

KTOmega · Joined: 04 Apr 2009 Posts: 3

So I just place my order in the "Ordering From PuzzleProz" section with what I'm ordering and where it's going to ship to? Do I have to PM him my information or anything?

unknown.soul · Joined: 30 May 2008 Posts: 64

KTOmega · Joined: 04 Apr 2009 Posts: 3

Many thanks.